Custom Western Damascus Integral
Comment225mm, 375 layer damascus integral gyuto with a nickel silver spacer and an ironwood handle.
Holiday Treat #4
CommentHere's a video from my perspective using the power hammer to forge weld and draw out a billet. This weld a draw totals the layer count at 184 with the next session totaling 1104 layers.
Holiday Treat #3
CommentHere is the start to a Bold Midnight Ripple Damascus gyuto and parer:
The completed custom parer and gyuto:
Holiday Treat #2
CommentUp next is a damascus gyuto/chef, damascus petty, and a monosteel Western integral. The two matching damascus blades will be receiving carbon fiber and ironwood handles. The Western integral will be getting a carbon fiber handle.
Holiday Treat #1
CommentCustom Titanium and Carbon Fiber Moribashi
CommentNew Store Knives
CommentStart of a Honyaki Damascus Integral Gyuto
CommentCustom Damascus and Mokume-gane Kiritsuke Work in Progress
CommentDamascus Yanagiba and Gyuto Set
3 CommentsWave damascus, mokume, 5720 year old bog oak, and snake wood for this set.
Damascus Gyuto WIP Video
CommentSeattle Knife Show
CommentI'll be at the Seattle International Knife Show this weekend, if you're in the area come by and say hi.
I'll have a couple of single bevels, suji, banno bunka, nakiri, a Western gyuto and a few other pieces.
Show information: http://bladegallery.com/shopcontent.asp?type=2015KnifeShow
Carbon Fiber and G10
CommentProjects in the near future:
250mm Western gyuto in 52100 with kurouchi/polish finish with carbon fiber handle and saya.
Steak knives in AEB-L with carbon fiber handles and sayas.
210mm gyuto in 52100 with kurouchi/polish finish with G10 handle and saya.
Wa Gyuto
1 CommentOregon Knife Collectors Mini Show - 6 December
CommentI'll have a table there with a few items that will be posted here.
Wild Western Gyuto
CommentSujihiki Up-cycle
CommentThis suji was sold and the new custom sent it in to be shortened, a change in the blade profile and to get a saya. I'll be putting some pics up for reference.
Nakiri!
CommentI'll have some nakiris in the store soon. They will be in AEB-L and 1095 with an edge length of 160mm and a heel height of 50mm ground thin.